The most important audio codecs above all:
This is the default decoder used for files with AC3 audio.
The AC3 decoder can create audio output mixes for 2, 4, or 6 speakers. When configured for 6 speakers, this decoder provides separate output of all the AC3 channels to the sound driver, allowing for full "surround sound" experience without the external AC3 decoder required to use the hwac3 codec.
Use the -channels option to select the number of output channels. Use -channels 2 for a stereo downmix. For a 4 channel downmix (Left Front, Right Front, Left Surround and Right Surround outputs), use -channels 4. In this case, any center channel will be mixed equally to the front channels. -channels 6 will output all the AC3 channels as they are encoded - in the order Left, Right, Left Surround, Right Surround, Center and LFE.
The default number of output channels is 2.
To use more than 2 output channels, you will need to use OSS, and have a sound card that supports the appropriate number of output channels via the SNDCTL_DSP_CHANNELS ioctl. An example of a suitable driver is emu10k1 (used by Soundblaster Live! cards) from August 2001 or newer (ALSA CVS is also supposed to work).
You need an AC3 capable sound card, with digital out (S/PDIF). The card's driver must properly support the AFMT_AC3 format (C-Media does). Connect your AC3 decoder to the S/PDIF output, and use the -ac hwac3 option. It is experimental but known to work with C-Media cards and Soundblaster Live! + ALSA (but not OSS) drivers and DXR3/Hollywood+ MPEG decoder cards.
libmadはマルチプラットフォーム、整数精度のみ(内部的には24bit PCM)のMPEGオーディオ・デコード・ライブラリです。壊れたファイルをウマく扱うことはできませんし、シークで問題が有ることもありますが、FPUの無いプラットフォーム(例えば ARM)ではmp3libよりもパフォーマンスが良いです。
サポートをイネーブルにするには、configureオプションで--enable-madを指定した上でコンパイルします。
This codec (selected by -ac hwmpa) passes through MPEG audio packets to hardware decoders, such as the ones found in full-featured DVB cards and DXR2 adapters. Don't use it in combination with any other audio output device (such as OSS and ALSA) that isn't able to decode it (you will hear only white noise).
The audio codec used in VIVO files depends on whether it is a VIVO/1.0 or VIVO/2.0 file. VIVO/1.0 files have g.723 audio, and VIVO/2.0 files have Vivo Siren audio. Both are supported.
MPlayer supports decoding nearly all versions of RealAudio:
Instructions on how to install the RealPlayer libraries are in the RealVideo section.
QDesign audio streams (fourcc:QDMC, QDM2) are found in MOV/QT files. Both versions of this codec can be decoded with QuickTime libraries. For installation instructions please see the Sorenson video codec section.
Qualcomm audio streams (fourcc:Qclp) is found in MOV/QT files. It can be decoded with QuickTime libraries. For installation instructions please see the Sorenson video codec section.
AAC (Advanced Audio Coding) はMOVやMP4ファイルに入っていることがある音声コデックです。FAADと言う名前のオープンソースのデコーダが http://www.audiocoding.com で配布されています。MPlayer には libfaad 2.1 beta の CVS snapshot が入っていますので、別途入手する必要はありません。
gcc 3.2 を使っている(上記の internal FAAD をきちんとビルドできません)などの理由で external library を使いたい場合、 download page からlibraryをダウンロードして、configureで --enable-external-faad を指定して下さい。AACファイルをデコードするにはfaad2が全部必要というわけではありません。 libfaad だけで十分です。ビルドのやりかたは以下の通り:
cd faad2/ sh bootstrap ./configure cd libfaad make make install
audiocoding.comではバイナリ配布をしていませんが、 (apt-)get Debian パッケージはChristian Marillat's homepageで、 Mandrake/Mandriva RPM は P.L.F で、 そして RedHat RPM は Grey Sectorで、それぞれ入手できます。
Documents
読み方
イントロ
インストール
使い方
CD/DVD使い方
FAQ
コンテナ
コデック
Videoデバイス
Audioデバイス
TV入力
Radio入力
Ports
MEncoder基礎
エンコガイド
Doc/bugreports?
FrontPage
■MPlayer
├Manuals
├Documents
└カテゴリ
■GENERAL
├MEMO
├LINK
├雑談所
├最近の更新
└popular
■Other Tools
├ffmpeg
├mkvmerge
├mp4box
├MPEG Streamclip
├QTCoffee
└x264cli
■About
└About Wiki
本日 | 1 |
昨日 | 0 |
累積 | 5028 |