dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255 inet6 ********* prefixlen 64 scopeid 0x1 ether ************* media: Ethernet autoselect (100baseTX <full-duplex>) status: active lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 ********** prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000
Routing tables
Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 0 0 dc0 127.0.0.1 127.0.0.1 UH 1 27 lo0 192.168.1 link#1 UC 1 0 dc0 192.168.1.1 ******** UHLW 1 9 dc0 1147
Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%dc0/64 link#1 UC dc0 fe80::***************** ********************** UHL lo0 fe80::%lo0/64 fe80::1%lo0 Uc lo0 fe80::1%lo0 link#3 UHL lo0 ff01::/32 ::1 U lo0 ff02::%dc0/32 link#1 UC dc0 ff02::%lo0/32 ::1 UC lo0
127.0.0.1 localhost.****** localhost 192.168.1.11 kumachan.******** kumachan 192.168.1.11 kumachan.*********
domain ********* nameserver 192.168.1.1
kern_securelevel_enable="NO" linux_enable="YES" moused_enable="YES" moused_port="/dev/psm0" moused_type="auto" sendmail_enable="YES" sshd_enable="YES" usbd_enable="YES" apm_enable="YES" ifconfig_sl0="inet 192.168.1.11 netmask 255.255.255.0" ifconfig_dc0="inet 192.168.1.11 netmask 255.255.255.0" defaultrouter="192.168.1.1" hostname="kumachan.**********" inetd_enable="YES"
sio1: configured irq 3 not in bitmap of probed irqs 0~~ sio1: port may not be enabled~~ sio1: configured irq 3 not in bitmap of probed irqs 0x1~~ sio1: port may not be enabled~~ sbc0: (ESS ES1878) at port 0x388-0x38b, 0x220-0x22f irq 5 drq 1 on isa0~~ pcm0: (ESS 18xx DSP) on sbc0~~ sio1: configured irq3 not in bitmap of probed irqs0x1~~ ...
=>
...~~ 4 1 0xc14d4000 2000 snd_driver.ko~~ 5 1 0xc147f000 4000 snd_ad1816.ko~~ 6 27 0xc1505000 18000 snd_pcm.ko~~ ...~~ 15 4 0xc12f2000 4000 snd_sbc.ko~~ ...~~ 27 ...
FreeBSD Audio Driver (newpcm)~~ Installed devices:~~ pcm0: (ESS 1878 DSP) at io 0x220 irq 5 drq 1 bufsz 4096 (1p/1r/0v channels duplex default)
=> pcmがインストールされているらしい。
→message:~~ pccard0: Card has no functions!~~ cbb0: PC Card card activation failed.
→message:~~ cardbus1: <network, ethernet> at device 0.0 (no driver attached)~~ cbb1: CardBus card activation failed
cardbus0; Expecting link target, got oxff~~ cardbus0: (unknown) at device 0.1 (no driver attached)~~ ...~~ cardbus0; Expecting link target, got oxff~~ cardbus0: (unknown) at device 0.1 (no driver attached)